DL-708 Honey Oak 190mm Long Plank Engineered Flooring | AMUER
- Model
- DL-708
Review
Description
AMUER · CHINA FACTORY · IN STOCK
DL-708 –– Multi-Tone Stained Oak 190mm Long Plank Engineered Flooring
DL-708 is a 190mm long plank engineered oak floor with a warm, multi-tone color stain and UV lacquer finish: 12/1.2mm multi-layer construction with a 1.2mm solid oak veneer wear layer over a poplar-eucalyptus multi-layer core, ABCD natural character grade, brushed surface, click floating installation. The color staining treatment introduces subtle plank-to-plank tonal shifts — from warm honey-gold through richer amber-brown — so the floor reads as a naturally varied, sun-warmed oak surface rather than a single flat colour. The brushed surface opens the grain to add visible texture beneath the UV lacquer, ensuring the stained colour reads as natural wood rather than a flat paint finish. UV lacquer provides durable, low-maintenance protection — no periodic re-oiling. DL-708 is available in stock from AMUER's Dalian China factory, making it immediately accessible for buyers who need a warm, characterful multi-tone oak floor without factory production lead time.
CE · FSC Chain of Custody · EUDR · ISO 9001:2015
arboren@arboren.com
www.amuerflooring.com
Full Product Specification
| Specification | DL-708 Detail | |||
| Product Code | DL-708 | |||
| Species | European Oak | |||
| Core Construction | Poplar-Eucalyptus Multi-Layer | |||
Total Thickness | 12mm | |||
Wear Layer | 1.2mm | |||
Board Width | 190mm | |||
Board Length | 1,900mm | |||
Colour | Natural | |||
Surface Treatment | Brushed | |||
Finish | UV Lacquer+Color Staining | |||
Grading | ABCD | |||
Installation | Click | |||
Underfloor Heating | Compatible — max. surface temperature 27°C; maintain 45–60% RH year-round | |||
Emission Class | E1 | |||
Certifications | CE (EN 13489) · FSC Chain of Custody · EUDR · ISO 9001:2015 | |||
MOQ | 200 m² per SKU | |||
Lead Time | 4-5 work days | |||
Packaging | Carton box with protective foam · Custom OEM packaging available | |||
Production | AMUER China Factory — 50,000 m² · ~300 workers · Est. 1997 | |||
Product Overview
Multi-Tone Oak at 190mm — Layered Warmth, Natural Texture, Immediate Availability
DL-708's defining characteristic is its multi-tone colour staining: rather than a single uniform hue, the stain is applied to produce natural-looking variation from warm honey-gold to deeper amber-brown across different boards, mimicking the tonal range found in a naturally reclaimed or sun-aged oak floor. This is not a surface pigment — the stain penetrates the opened grain channels of the brushed surface, so the colour reads over and through the wood's natural texture rather than as a flat applied layer. The brushed surface is critical to this effect: without the opened grain, the stain would sit on the surface and risk reading as paint; with the brushed grain, the stain pools into the grain channels and settles differently across the ridges of each plank, reinforcing the natural, hand-finished, multi-tone appearance across the installed floor.
UV lacquer completes DL-708 with a durable, low-maintenance sealed surface that locks in the multi-tone stain without alteration. The satin sheen adds controlled surface reflectance that enhances the warmth of the varied tones under artificial light — in tungsten or warm LED environments, DL-708 reads as a rich, dimensional, character-driven floor.
The 12/1.2mm multi-layer construction with a poplar-eucalyptus core makes DL-708 a value-positioned specification within the AMUER range: the oak veneer wear layer at 1.2mm delivers the authentic appearance and surface quality of a solid oak wear layer at a more accessible price point, while the stable multi-layer core provides the dimensional stability required for click floating installation over a wide range of subfloor types including UFH.
Installation & Room Suitability
Click Installation (Floating)
・Subfloor flatness: 3mm per 2m maximum
・Approved acoustic/thermal underlay: 3mm maximum
・Expansion gap: minimum 12mm at all walls
・Acclimatisation: 48 hours before laying
・Stagger end joints: minimum 300mm
・Micro-bevel joints: do not fill or caulk
Underfloor Heating
・Compatible — maximum surface temperature 27°C. Maintain 45–60% RH year-round. UV lacquer is more moisture-resistant than wax oil. Activate UFH gradually after installation.
・1.2mm wear layer supports light surface maintenance only — touch-up buffing with compatible UV lacquer maintenance product. Not suitable for full machine sanding and refinishing. Communicate this clearly to clients specifying DL-706 for long-term installation.
Room Suitability
| Room / Application | Suitability | Method | |||||
| Living Rooms | Excellent | Warm honey-amber reads beautifully in living rooms with warm artificial light. UV lacquer is durable for everyday residential use. | |||||
| Open Plan | Excellent | The consistent ABCD character and warm stain colour create a unified warm ground across large open-plan spaces. | |||||
| Bedrooms | Excellent | Warm amber creates an enveloping bedroom floor. UV lacquer — no maintenance re-oiling required. | |||||
Dining Rooms | Very Good | UV lacquer resists dining spills. Honey-amber particularly warm under dining lighting. | |||||
Home Offices | Very Good | Warm tone creates comfortable working environment. Desk chair mat recommended. | |||||
Hallways | Good with care | UV lacquer resists abrasion. 1.2mm wear layer — avoid heavy grit and abrasive traffic. | |||||
Kitchen (dry zone) | Consider carefully | UV lacquer resists splashes in dry zones. Avoid installation near sink. | |||||
Bathrooms | Not Recommended | Not suitable for wet environments. | |||||
Care & Maintenance
| Task | Method | ||||
| Daily | Dry sweep or vacuum with soft brush head. The brushed grain channels collect fine grit — remove regularly to protect the UV lacquer surface. | ||||
| Weekly | Damp mop with well-wrung cloth and pH-neutral UV lacquer floor cleaner only. No steam mop. No standard household cleaners. | ||||
| Spills | Wipe immediately. UV lacquer provides good spill resistance. | ||||
Micro-bevel joints | Do not fill or caulk. Clean with soft vacuum brush. | ||||
No re-oiling | UV lacquer requires no periodic re-oiling. Never apply wax or oil to DL-706 — adhesion failure with UV lacquer will result. | ||||
Wear layer care | 1.2mm wear layer — avoid dragging heavy furniture, use felt pads, use entrance mats to prevent grit entry. Light surface buffing only if refinishing is required; not suitable for full machine sanding. | ||||
Never | Steam mop · standing water · wax or oil on UV lacquer · standard household cleaners with ammonia or bleach · abrasive pads · machine sanding. | ||||
Certifications & Factory
Manufactured by AMUER — China Factory
DL-708 is manufactured at AMUER's China factory: a 50,000 m² facility with approximately 300 workers producing engineered hardwood flooring since 1997. ISO 9001:2015 certified quality management covers raw material intake, in-process dimensional checks, surface finish audit, board selection audit, and pre-shipment inspection. Every DL-708 shipment carries the following certifications as standard:
✓CE Marking (EN 13489) — required for all EU market sales
✓FSC Chain of Custody — sustainable timber sourcing documentation
✓EUDR — EU Deforestation Regulation compliance
✓E1 Emission Class — lowest European formaldehyde standard
✓ISO 9001:2015 — certified quality management system
FAQ
Q1. What makes DL-708's colour different from a single-tone oak floor?
DL-708 uses a multi-tone colour staining process applied over a brushed ABCD grade oak surface, producing natural variation from honey-gold to amber-brown across different boards rather than one uniform colour. This gives the installed floor a layered, naturally reclaimed appearance. Both stained and unstained AMUER options share the same UV lacquer finish and click installation; the difference is entirely in the colour treatment.
Q2. What does 12/1.2mm construction mean?
12mm is the total board thickness. 1.2mm is the solid oak veneer wear layer — the surface you walk on, which provides the authentic appearance and texture of European oak. The remaining depth is the poplar-eucalyptus multi-layer core, which provides dimensional stability. The 1.2mm wear layer supports light surface maintenance but is not suited to full machine sanding and refinishing — this is the correct specification for a value-positioned floor prioritising colour, appearance, and UV lacquer durability.
Q3. What is a poplar-eucalyptus multi-layer core?
The poplar-eucalyptus multi-layer core is an alternative to the solid timber cross-ply core used in higher-specification engineered floors. Thin layers of poplar and eucalyptus are alternated at opposing grain directions to create a dimensionally stable composite core — resisting expansion and contraction under seasonal humidity and temperature changes. The core provides the click-joint stability and UFH compatibility of a standard engineered floor at a more cost-efficient price point.
Q4. Can DL-708 be used over underfloor heating?
Yes — DL-708 is compatible with both hydronic and electric UFH, maximum surface temperature 27°C. Maintain indoor humidity at 45–60% RH year-round. UV lacquer finish is more moisture-resistant than wax oil. Activate UFH gradually after installation: increase 1–2°C per day to target temperature.
Q5. How do I maintain UV lacquer on DL-708?
UV lacquer on DL-708 requires regular dry sweeping, weekly damp mopping with a pH-neutral UV lacquer floor cleaner, and immediate spill response. No periodic re-oiling is required. Never apply wax, oil, or maintenance oil products to DL-708 — these will cause adhesion failure with the UV lacquer. The 1.2mm wear layer supports light surface buffing with a compatible UV lacquer maintenance product if required; machine sanding is not appropriate.
Q6. Is DL-708 available from stock?
Yes — DL-708 is a Dalian China factory stock product. Contact arboren@arboren.com for current available quantities, pricing, and dispatch schedule.
Contact Us
Specify DL-708 for Your Next Project
Multi-Tone Stained Oak · 190mm Long Plank · ABCD Grade · Brushed + Color Staining · UV Lacquer · Click
12/1.2mm · 1,900mm · CE · Dalian factory stock · Contact for quantities
🏭 Dalian Factory Stock — Competitive Pricing — Short Lead Times
arboren@arboren.com · www.amuerflooring.com
